If during operation you should find that the measured value of the dosing device does not
really correspond to the value measured with a professional measuring device, you can
enter the measured value here if the value is between 7 and 7.8 pH
Via the back button you return to the main menu
Pool.
You cannot calibrate pH AND Redox at the same time.
10 Preparing the pool water
Make sure the pH of the pool water is at least between 7.2 and 7.8 and as close to 7.4 as
possible. Make sure the content of chlorine stabilizer (cyanoic acid) in the pool water is
between 20-40 ppm (20-40 g / 10 m³)
11 Setting parameters
A number of parameters must be set. Press the middle button. You will see the following
screen:
11.1) Language
You can set a (different) language. Press the middle key again. Then navigate to the
languages Français, Castellano, Italiano, English, Deutsch by using the upper or lower key.
Confirm your choice of language by pressing the middle button.
11.2) Dosing mode: proportional continuous ( not for salt electrolysis) Salt time, Salt Rx (for)
salt electrolysis
