BendPak MDS-6EXT, Инструкция по установке и эксплуатации

Страница: 6 / 92

MDS-6 Mid-Rise Scissor Lifts
6
P/N 5900030 — Rev. D — April 2021
Frequently Asked Questions
Question
: How much weight can MDS-6 Series Lifts raise?
Answer : They can raise Vehicles up to 6,000 pounds (2,722 kg).
Q : What is the difference between the MDS-6EXT and MDS-6LP Lifts?
A : The MDS-6EXT/F has
extended-length Platforms
, so it can raise Vehicles with longer
wheelbases. The MDS-6LP/F can raise Vehicles higher .
Q
: How high does a “mid-rise” Scissor Lift raise a Vehicle?
A : There are differences between the four models, but they all raise in the neighborhood of three feet,
plus a little extra height from the Lift Blocks.
Q
: What does “flush mount” mean?
A : It means the Frames of the MDS-6EXT F and MDS-LP F are installed below the surface of the
Concrete, in a Concrete Cutout, so Vehicles drive straight onto the Platforms without having to go
up a Ramp (the tops of the Platforms are “flush” with the floor).
Q : Can the Lifts covered in this manual be installed outdoors?
A : No. All Lifts detailed here are approved for indoor installation and use only. Outdoor installation is
prohibited.
Q : Can I put the Console on either side of the Lift?
A : Yes. The Hydraulic Hoses and the Covers that come with the Lifts are long enough to support the
Console being up to 40 inches away on either side. Make sure to position the Console next to the
Cylinder side of the Lift near the Side Holes in the Bases; the Air Line, Return Line, and Hydraulic
Hoses are routed through them.
Q : What does a Safety Lock do?
A
: Safety Locks hold the Platforms up, once they are engaged . Even if the Lift loses power, the
Platforms stay where they are if they were left engaged on a Safety Lock. Only leave your Lift
either fully lowered or engaged on a Safety Lock.
Q : How many Safety Locks do the Lifts have?
A : Three.