MDS-6 Mid-Rise Scissor Lifts
19
P/N 5900030 — Rev. D — April 2021
New Concrete Slab Requirements
If the concrete in your Lift location is unsuitable in some way (thickness, compression strength,
condition, etc.) then the following recommendations for a new concrete slab are offered. Please read
the following concrete recommendations carefully before producing any new Concrete structures for
the Lift.
BendPak strongly recommends working with a concrete specialist to plan and
create Concrete Cutouts and/or Slabs for the MDS-6 Lift.
•
All properties
of the new Slab are mandatory and must conform to these requirements before
the Lift is deemed acceptable.
•
New Concrete Slabs
must be totally surrounded by and flush with the existing concrete floor.
•
New Concrete Slabs
must be “Keyed-In” around the perimeter of the pour or may be “Tied-in”
using Anchor Dowels. See Key-In/Tie-In Detail below.
•
Compression strength
of the New Pour Concrete Slab is to be 4000 psi minimum.
•
Minimum aging
of new Concrete Slabs is 28 Days.
•
Minimum thickness
of the New Pour Concrete Slab is 14 in. (356 mm) for Flush Mount Lifts
and 10 in. (254 mm) for surface mount Lifts. See diagrams/recommendations for your specific Lift
model.
•
Minimum Width and Length
of the new Concrete Slab, see diagrams/recommendations for
your specific Lift Model.
•
Maximum allowed Slope
of New and existing Concrete Slabs is 3-Degrees. Defined as no
more than 3/8 in. (9.5 mm) difference over the installation area.
•
Steel reinforcement
use Grade 60 - #4 rebar Ø1/2 in (Ø12.7 mm) Nominal Diameter.
•
Rebar Spacing
as per the diagrams/recommendations on the following pages.
•
Locate reinforcing bars
away from any anchor positions or at an elevation that allows you to
avoid drilling into reinforcing steel while installing the Expansion Anchors for the Lift.
•
Certified strength documentation
for New Pours should be obtained from the firm who
supplies the Concrete Mixture at the time of the pour.
•
Do
not
install the Lift on any surface other than Concrete conforming to the minimum compressive
strength, aging, reinforcement, and thickness stated in these requirements.
•
Never
install the Lift over an expansion joint.
•
All Lift Anchors
must
be a minimum of 6 in. (152 mm) away from any expansion seams, control
joints or other inconsistencies in the Concrete.
•
Never
install the Lift on hand-mixed Concrete.
•
Do
not
install the Lift on a secondary floor level or on any ground floor with a basement beneath
without written authorization from the building Architect and prior approval of BendPak Inc.
•
Never
drill or cut into a post tensioned slab. Seek qualified personnel to identify cable locations
prior to cutting or drilling
Содержание MDS-6EXT
