Bender FTC470XET, Руководство по эксплуатации

Страница: 44 / 84

The user interface of the internal Web server
44 TGH1375en/02.2010
6.6.14 Sending a test mail
Use this function to check the e-mail parameter setting and the entire function for notification
in case of alarm.
1. Click "Send test mail" in the BMS explorer.
2. Thereupon activate the appearing button "Send test mail“.
3. After a short time, a table appears listing the success or failure of the e-mail dispatch.
In case of success, the respective target address will be notified, in case of failure consult your EDP
administrator.
6.6.15 Changing the password
Only the system administrator is allowed to change his password and the BMS administra-
tor's password. He can change one of the passwords or both at the same time.
1. Go to the start page.
2. Click on "Password parameter setting".
3. Enter the valid administrator password into the edit field. After correct input it will be confirmed.
4. Click on the menu item "Address X : FTC470XET“ in the BMS explorer. The associated submenu will
be opened.
5. Select "Change password" from the submenu, the associated input screen will appear.
6. First enter the old administrator password, then the new one. Re-type the password into the respec-
tive input field. Click "Save" to confirm.
7. Once the password is stored, it will be confirmed.
6.6.16 System software update
The FTC470XET protocol converter offers the possibility to update the device system soft-
ware. For details refer to page 71.