manualshive.com logo in svg

Bender FTC470XET, Руководство по эксплуатации

Поделиться
Скачать
Bender FTC470XET Скачать руководство пользователя страница 16

The FTC470XET protocol converter

16

TGH1375en/02.2010

4.4 BMS side of the FTC470XET

On the BMS side, the FTC470XET protocol converter can optionally be used as master or as 
slave.

z

BMS address 1 = master mode

z

BMS address 2 to 30 = redundant master mode

z

BMS address 2 to 30 = slave mode

The following data types are available on the BMS bus:

4.4.1

Alarm and operating messages

Bender devices connected to the BMS bus are cyclically scanned for alarm and operating 
messages. Each device can store up to 12 alarm and operating messages, which are organised 
according to the channels 1-12.

4.4.2

Diagnostics and parameterisation

This data is only sent to the bus if requested by BMS commands.

4.4.3

Redundant master function

FTC470XET provides the "Redundant master" function. In the event of failure of the regular 
master (bus address 1) after approximately 60 seconds this "Redundant master" takes over 
the master function in order to control the BMS bus. If the regular master becomes active 
again, the "redundant" FTC470XET returns the master function. 

In case of failure of the regular master, first the device with BMS address 2 tries to become 
redundant master. If it fails to take over the master function, address 3 will be the next and 
so on. That means that an FTC470XET with BMS address 2 is more likely to take over the 
redundant master function than a device with address 30. 

4.4.4

FTC470XET in slave mode

If the FTC470XET is operated in the slave mode in the existing BMS environment, one of the 
following devices has to act as BMS master:

z

IRDH275, 375, 575 software version 1.40 or higher

z

PRC1470 software version 1.82 or higher

z

TM1000 software version 1.82 or higher

z

FTC470XDP software version 1.31 or higher

z

FTC470XET software version 1.01 or higher

z

FTC470XMB software version 1.31 or higher

It is recommended to prefer the master mode in order to get faster data access.

The FTC470XET provides the redundant master function when a BMS address be-
tween 2 and 30 has been assigned to it.

Please note that the FTC470XET cannot be operated in combination with a PRC470
control and indicating device!

Содержание FTC470XET





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды