manualshive.com logo in svg

Bender ATICS-2-63A-ISO, Руководство пользователя

Поделиться
Скачать
Bender ATICS-2-63A-ISO Скачать руководство пользователя страница 74

74 

ATICS-2-ISO_D00046_04_M_XXEN / 03.2021

Menu mode: Operation and setting

Menu

Description

12. Temperature

on  

Relay switches in the event of overtemperature in the IT system  

 transformer
off

13. Undervolt.

on 

Relay switches in the event of undervoltage at the ATICS® output    

 

(line 3)

off

 

i

The reminders for the test (7. Test interval) or the service (8. Serviceinterv) are 
always triggered at 12:00 pm. If these messages appear at night, the time is set incorrectly on the de-
vice.

7.3.4.6  Settings menu 6: Dig. input

In this menu, you can adjust settings for the mode of operation and function of the digital input. The 
digital input is electrically isolated. It is designed for an input of AC/DC 24 V. ATICS-2-ISO has a digital 
input and a relay output with a changeover contact.

For the input, selection is possible when the input is set to: "24V" (high) or "0V" (low). In the "24V" set-
ting, the selected function (e.g. alarm message) is carried out when there are 24 volts there. In the "0V" 
setting, the selected function is carried out when there are 0 volts there. It is for this reason that you 
should always set unused digital inputs to "off".

 

i

By selecting the function of the digital input, the recommended response value is automatically ad-
justed: 
- Test, M/A,1, 0, 2 (switch positions)  

24V (cannot be changed) 

- no2->1, 1<->2, bypass, alarm and OPL  

0 V (can be changed) 

The "Bypass" setting can only be changed temporarily for test purposes. After restarting the ATICS® 
this setting returns to "0V"!

Adjusting the settings:

Содержание ATICS-2-63A-ISO









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды