manualshive.com logo in svg

Bender ATICS-2-63A-ISO, Руководство пользователя

Поделиться
Скачать
Bender ATICS-2-63A-ISO Скачать руководство пользователя страница 43

 

ATICS-2-ISO_D00046_04_M_XXEN / 03.2021 43

ATICS-2-63A-ISO

4.2.9.7  Bypass switch (optional)

The ATICS-BP-… bypass switch makes it possible to test and change the ATICS® transfer switching and 
monitoring device without interrupting the power supply to the line downstream of the transfer 
switching device. To make settings, refer to chapter „Operation with bypass switch“ on p. 90.

4.2.10 Fastening, inserting and securing connections

Connect the terminals according to the wiring diagram to the plug connectors (A, B) and the three con-
nector plugs (C).

•  Connect lines 1, 2 and 3 to the plug connectors (A,B). Observe the stripping length of 20 mm 

and do not use ferrules. Use a Torx® screwdriver T20 or a slotted screwdriver of 6.5 x 1.2 mm. 
Tightening torque: 2.5 Nm (≤ 25 mm²) or 4.5 Nm (≥ 25 mm²). Ensure that the lines are 
short-circuit and earth-fault proof!

•  Use a slotted screwdriver of 2.5 x 0.4 mm to connect the three connector plugs (C). Stripping 

length: 7 mm. Tightening torque: 0.22…0.25 Nm.

1. Insert bottom green plug connector (B) and secure with mounting screws. After that, insert 

top green plug connector (A) and secure with mounting screws.

2. Insert the three connector plugs (C).

 

i

ATICS…400 only: Plug the connector into the top (opposite side of C).

 

i

Only " -ES" version of ATICS®: Connect the ATICS-ES energy storage device using the cable supplied.

4.3 

Other functions

4.3.1  Sealing the transparent cover

The transparent cover can only be sealed when it is closed (automatic 
mode).

C

A

B

N

N

Содержание ATICS-2-63A-ISO









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды