manualshive.com logo in svg

Bender ATICS-2-63A-ISO, Руководство пользователя

Поделиться
Скачать
Bender ATICS-2-63A-ISO Скачать руководство пользователя страница 66

66 

ATICS-2-ISO_D00046_04_M_XXEN / 03.2021

Menu mode: Operation and setting

7.3.3.1  Operating examples: History

1. Use the arrow buttons to select the re-

quired entry. The most recent entry ap-
pears first on the display. Older messages 
can be selected using the arrow buttons.

2. Press the " " button to call up the mes-

sage text of the selected entry. The path 
the message took to reach the device is 
displayed (in this case: insulation , BMS bus 
address 3, channel 9). Refer to the tables 
„Fault and alarm messages“ on p. 83 for 
more information on possible displays.

3. Press the " " button again to return to the entry selection. Repeat these operating steps for 

all messages. Then press "ESC" to exit the menu. The message "TEST" appears in the last line 
of the history memory alarm text display: Note that the current history memory entry was 
created as the result of a test initiated on this device.

7.3.3.2  Operating example: Config.logger

1. Use the arrow buttons to select the re-

quired entry. In this case: The settings for 
the digital input are changed here. 

2. Press " " to call up the additional text for 

the selected entry. The function of the dig-
ital input has been changed from "off" to 
"0". The last line contains an identification 
code for the type of modification (in this 
case: [4/1]). Channel 1 means that the first 
digital input has been changed. Please 
contact the Bender service and provide the identification number if the modification led to 
an undesirable behaviour of the device.

7.3.4  Menu 4: Settings

The settings menus are protected by a password (see chapter „Settings menu 11: Password“ on p. 
79). Password protection is only effective if the password has been enabled. When opening one of 
those settings menus, the password entry screen appears automatically: 

After entering a valid password, all settings menus (ex-
cept the "Service" menu) are freely accessible until the 
menu mode is exited.

Addr. : 3 Chan.: 9

TEST 

History

500 / 500

History

500 / 500

 

10/ 17

 

10/ 17

Settings

Enter password: 

 0  0  0

Содержание ATICS-2-63A-ISO









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды