Belmont Bel-Nova AL-D101G, Руководство по установке

Страница: 30 / 56

3 Installation
Necessary tools
Phillips screwdriver No. 1,2,3
Hex key wrench; width across flats: 2 mm,3 mm,4 mm
Long nose pliers
3-2-4 AL-D106G-QU
(1) Attach the dental light
Also refer to dental unit installation instructions for installation of
the dental light.
1. Remove the two button screws (M6 x 8, White) from
the balance arm joint.
2. Pass the lead cable through the light pole.
The light pole is packed with the dental unit section.
3. Insert the balance arm joint into the light pole and fix it
with two button screws (M6 x 8, White) .
4. Feed the light cable through the swing arm and pull
the end of the light cable from the lower end of the
swing arm.
5. Mount the light pole onto swing arm.
Button screw (M6 x 8, White)
Light pole
Balance arm joint
Lead cable
Light pole
Swing arm
Pull lead cable from the
light through swing arm
30