manualshive.com logo in svg

Belmont Bel-Nova AL-D101G, Руководство по установке

Поделиться
Скачать
Belmont Bel-Nova AL-D101G Скачать руководство пользователя страница 5

1    Cautions regarding installation

To avoid the risk of electric shock, this equipment must only be 
connected to a supply mains with protective earth.
Failure or electric leak may result in electric shock.

Do not directly expose human eyes to LED light.
Exposure may hurt human eyes.

2. Do not drop the product, let it crash into something, or apply 
    strong impact.

3. Do not connect an input power supply other than with the 
    rated power level.

4. Make sure to connect ground wires.

5. Have the clinic equipped with double-pole switch at the   
    power outlet or the switchboard.

6. Adjust the levels of the unit and chair so that the light stops in 
    the required position.
    Read the installation instructions for the unit and chair 
    concerning the level adjustment.
    (AL-D106G / AL-D109W)

7. Once all work is completed, confirm that each part operates    
    normally.

WARNING

5

Содержание Bel-Nova AL-D101G

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды