Safety Instructions
F. If the telephone exhibits a distinct change in performance.
13. Do not use the telephone to report a gas leak in the vicinity of the leak.
14. Never install telephone wiring during a lightning storm.
15. Never install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
16. Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
17.
Use caution when installing or modifying telephone lines.
BATTERY Safety
CAUTION:
Danger of explosion if the BATTERY PACK is replaced with incorrect type. Replace only with
the same or equivalent type. To reduce the risk of fire or personal injury, read and follow
these instructions:
1. Use only the following type and size of BATTERY PACK;
Cordless Telephone BATTERY PACK
3.6V, 600mAh
U.S. Electronics Inc.
Ni-MH BATTERY PACK: Model B655
2. Do not dispose of the BATTERY PACK in a fire. It may explode. Check with local codes for
possible special disposal instructions.
3. Do not open or mutilate the BATTERY PACK. Released electrolyte is corrosive and may cause
damage to the eyes or skin. Electrolyte may be toxic if swallowed.
4. Exercise care in handling the BATTERY PACK to prevent shorting the BATTERY PACK with
conductive materials such as rings, bracelets, and keys. The BATTERY PACK or with
conductive materials such as rings, bracelets, and keys. The BATTERY PACK or conductor
may overheat and cause burns.
5. Charge the BATTERY PACK provided with (or identified for use with) this telephone only in
accordance with the instructions and limitations specified in this manual.
6. Observe proper polarity orientation between the BATTERY PACK and BATTERY CHARGER.
SAVE THESE INSTRUCTIONS
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The BATTERY
PACK is recyclable. At the end of its useful life, under various state and local laws, it may be illegal
dispose of this BATTERY PACK into the municipal waste stream. Check with you local solid waste
officials for details in your area for proper disposal.
Getting Started
Connecting Your Phone
This section is a reference guide to the basic functions and operations of your cordless telephone.
For more detailed descriptions of the operations and features of this telephone, refer to the contents.
1. Carefully remove your cordless telephone from its shipping carton. If there is any visible damage,
do not attempt to operate this equipment. Return it to the place of purchase.
2. Check to be sure you have all items that come with this cordless telephone system. You should
have a
HANDSET, BASE UNIT,
AC ADPATER, MOUNTING BRCAKET, TELEPHONE LINE
CORD, SHORT TELEPHONE LINE CORD, BELT CLIP, and an OWNER’S MANUAL.
HANDSET
MASTER BASE
UNIT
MOUNTING
BRACKET
BELT CLIP
CHARGER
TELEPHONE
LINE CORD
SHORT
TELEPHONE LINE
AC
ADAPTOR
BATTERY
PACK
3. Insert the small plug on the end of the AC Adapter into the Power-in Connection Jack at the back
of the master Base Unit.
4. Plug the AC Adapter into a 120V AC wall outlet.
5. Insert the small plug on the end of the AC Adapter into the Power-in Connection Jack at the back
of the charger Base Unit. And plug the AC Adapter into a 120V AC wall outlet.
!
USE ONLY WITH CLASS 2 POWER SOURCE 9V AC, 500mA for Master Base unit,
200mA for Charger Base.
6. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the
other end into the Telephone line connection jack at the back of the
BASE UNIT
. (If you have
an older 4-prong TELEPHONE JACK, you will need an RJ-11C TELEPHONE JACK ADAPTER.
This adapter is available at the same place you purchased your telephone.)
7. We recommend not placing this unit next to appliances. Doing so may cause interference.
