Desk Mounting
Desk Mounting
One of the special features of your telephone is the unique design if the MOUNTING BRACKET
which can hold your phone at an angle of 30º when desk mounting.
1. 30º Position (See Figure 1):
With the back of the
BASE UNIT
facing up, insert the hooks of the MOUNTING BRACKET
(following the arrow direction for the DESK MOUNT) into the matching slots of the
BASE UNIT
(as shown in Figure 2). Then slide the MOUNTING BRASCKET into place as indicated by the
arrows.
FIGURE 1
FIGURE 2
IMPORTANT:
Attach the MOUNTING BRACKET when using your phone on a desk.
IMPORTANT
Placing your BASE UNIT near appliances such as
television, refrigerators, radios, or microwave ovens
may cause interference.
Wall Mounting
Wall Mounting
You may choose to put the
BASE UNIT
of your cordless telephone on a wall.
1. With the back of the
BASE UNIT
facing up, connect the SHORT TELEPHONE LINE CORD to
the TELEPHONE LINE CONNECTION JACK.
2. Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the
MOUNTING
BRACET
.
3. Insert the hooks of the
MOUNTING BRACKET
(following the arrow direction for the WALL
MOUNT) into the matching slots of the
BASE UNIT
(as shown below). Then slide the
MOUNTING BRACKET
into place as indicated by the arrows. Plug the free end of the
SHORT
TELEPHONE LINE CORD
into the
MODULAR WALL JACK
.
4. Insert the tabs into the slot on one side of the base then press the tabs on the other side & snap
into the slot.
5. Align the upper keyhole on the
MOUNTING BRACKET
with the upper stud of the wall plate, so
that the opening end of the
MOUNTING BRACKET
matches the lower stud, then pull the
BASE
UNIT
down until it is securely seated
FIGURE 1
Base
Unit
FIGURE 2
