HANDSET Controls
5.
REDIAL /SAVE/PAUSE
Button:
(REDIAL) Press to redial the last number you dialed.
(SAVE) Press and hold down to save the changes on the listed items. (PAUSE) Press to insert
a pause while dialing. (You will need the
button to dial numbers which use an
alternative Long Distance Access Code.)
6.
DIAL 10
Button:
(Dial 10) Press and hold down to place a local call with Area Code.
7.
DIAL 7/TEMPORARY TONE
Button:
(Dial 7) Press and hold down to place a local call.
(*) Press to temporarily change the dialing mode from Pulse to Tone for rotary service users.
(Press once before entering numbers to access the answering system or electronic banking
service, etc.)
8.
FLASH
Button:
Press to answer a call if you have call waiting.
9.
NEW CALL/MSG (MESSAGE) WAITING LED Indicator:
Blinks when recording a new incoming
call or when receiving Message Waiting signal. If you have subscribed to a Voice Mail message
service from your local telephone company.
10.
SCROLL UP-DOWN, SHIFT LEFT-RIGHT
Button:
Press to move around the Large
LCD Screen.
11.
TALK
Button
: Press to answer an incoming call or to place a call. Press to end a call.
12.
DELETE/SCAN
Button:
(Delete) Press and hold down to delete items or individual
characters. (Scan) Press to change the operating channel when you hear interference.
13.
MENU (Function)/VOICE MAIL
Button:
(FUNCTION) Press to access special
function operation in Standby mode. (Voice Mail) Press to automatically dial the Voice Mail
Post Code in your area to access your Voice Mail message.
14.
HEADSET JACK:
For connecting your headset plug to enjoy hands-free communication.
15.
TELEPHONE KEYPAD:
Allows you to make a call depending on pressed button.
16.
DIAL 1+/#
Button:
(Dial 1+) Press and hold down to place a long distance call.
(Automatically adds the number 1 at the beginning of the displayed telephone number.)
17.
EDIT/Call Transfer
Button:
Press to edit listed items. (Call Transfer)This allows
you to transfer a call from one handset to another
18.
CHARGE CONTACTS:
For charging the BATTERY PACK inside the
HANDSET
. We
recommend cleaning the CHARGE CONTACTS periodically with a damp cloth.
BASE UNIT Controls
BASE UNIT Controls
1.
BASE UNIT ANTENNA
2.
RINGER ON/OFF:
Set switch to Off Position to disengage the ringer on the
BASE UNIT
.
3.
ANNOUCEMENT ONLY/INCOMING MESSAGE Switch:
ICM
– System records the incoming messages.
ANNC
– System plays your announcement and then hangs up without recording message.
4.
MESSAGE ALERT:
Set Switch to In to generate a “beep” sound every 15 seconds when new
message has been received.
5.
TELEPHONE LINE CONNECTION JACK
6.
POWER-IN CONNECTION JACK
7.
RING SELECT Switch:
To select the number of rings before the Answering System answers a
call:
3R
– System answers a call after third ring.
5R
– System answers a call the fifth ring.
TS (TOLL SAVER)
– System answers after the third ring only if you have new message.
Otherwise, the system will answer after the fifth ring.
IMPORTANT
Placing your BASE UNIT near appliances such as
televisions, refrigerators, radios, or microwave ovens
may cause interference.
flash
Save/pause
Redial
Save/pause
Redial
1+
#
Voice mail
menu
talk
Ÿ
Ż
Ź
ź
7
Ϡ
10
OPER
Edit
Call transfer
0
scan
delete
