Cordless Telephone Operation
NOTE
:
1. The Call Timer will start to count once you press the
button.
2. The LCD Screen emits light for 5 seconds every time you press any buttons on the
HANDSET
.
3. When “CALLS” appears on the LCD Screen, it means that the HANDSET is off-hook (connected
to the telephone line).
Minutes
Seconds
Channel
Placing Calls
1. Press the
button, the Call Timer starts to
count. The HANDSET LCD Screen will display
“Calls”, and “Talking”, and the BASE UNIT IN
USE LED indicator will light up.
2. Listen for a dial tone.
3. Dial the phone number.
4. When you have finished with your call, press the
button again or place the HANDSET on
the BASE UNIT.
OR
1. Dial the phone number.
2. Press and hold down the DIAL 7
or the
DIAL 10
or the DIAL 1+
button.
The BASE UNIT IN USE LED indicator will light
up.
3. When you have finished with your call, press the
button again or place the HANDSET on
the BASE UNIT.
Cordless Telephone Operation
Call Transfer
1.
When User expect to transfer a call made or receive from one handset to another, just simply
press the call transfer key & display will shows “EXT. NUMBER”, then press the handset
number to execute the number to execute the transfer.
2.
If the call transferred party does not pick up the call within 20 seconds the call will be bounced
back to initiate party, If initiate party do not pick up the transferred call within 20 seconds. The
Tel Line will be disconnected automatically.
Headset Feature
Your telephone can utilize a headset (not included) to be
connected to your
HANDSET
for you to enjoy hands-free
communication. Insert the small plug at the end of the
headset into the HEADSET JACK at the right side of the
HANDSET
. Follow the procedures discussed in “Receiving
Calls” and “Placing Calls” to receive and place a call.
NOTE
: When you plug the headset plug into the HEADSET
JACK it automatically mutes the MICROPPHONE
and SPEAKER of the
HEADSET
. Unplug the
headset to return the
HANDSET
to normal use.
Headsets are available at most retail outlets that sell
telephone equipment. The HEADSET JACK is compatible
with 2.5 mm headset plugs only.
Redial Feature
1. If you get a busy tone, press the
button or place
the HEADSET on the BASE UNIT to hang up.
2. Later, press the
button again.
3. Listen for a dial tone.
4. Press the
button. This will automatically redial
the last telephone number you called in TALK mode.
5. When you have finished with your call, press the
button again (the BASE UNIT IN USE LED
indicator will return off) or place the
HEADSET
on the
BASE UNIT
.
NOTE
:
If you are far away from the
BASE UNIT
, the
HEADSET
emits “beep” sounds to warn you that the
background noise level is too high for proper communication between the
HANDSET
and the
BASE
UNIT
. When you hear this sound, you should move closer to the
BASE UNIT
to reduce the noise
level. Otherwise, the call will automatically cut off.
talk
Save/pause
redial
talk
7
Ϡ
1+
#
10
OPER
talk
talk
talk
talk
talk
CALLS
00
MIN
1
SEC
14
0
