3 6
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA
JANUARY 2003
ANTI-TORQUE [ DIRECTIONAL CONTROL ] SYSTEM
There is a pedal length adjustment knob located at the rear base of the pedestal,
which allows approximately 10.2 centimeters (4 inches) fore/aft movement of the pedals
relative to the pilots feet. Provisions exist for both the addition of the optional dual/
copilot control kit, and the hydraulic brake pedals of the optional wheel landing gear.
This system transmits movement from the
control pedals to the tail rotor. The direct
linkage under the floor transmits input
through the belly control tunnel to the single
servo-actuator and on to the tail rotor.
TAIL ROTOR SERVO
PEDAL ADJUSTMENT
CONTROL KNOBS
COLLECTIVE
FRICTION
CONTROL
Содержание BELL 430
Страница 1: ...Product Data ...