[P]3 Bottom fishing
Bottom fishing program makes the sinker automatically
follow the bottom, even though the depth changes.
Fishing depth
can still be used and acts as a
Maximum depth
of fishing.
The program uses five new features.
•
Detect time [P]2[PPP]
. Is the time the machine needs
to register the bottom. Time is the time it takes for the
wheel to rotate one lap. When a lap takes longer than
the chosen time, the current depth is recorded as the
bottom.
•
Bottom distance [P]2[PPP P]
is the distance the
machine holds the sinker above the bottom after each
jig.
Jig
length
Diagram 3
Bottom program
Time
Bottom paus
No Of Jig
Bottom distance
Depth paus
[P]3
Pictures
Min
Max
Factory
Step
Unit
Navigation
Line out
0
999
-
1
M/Fm/Ft
Main screen
Fish program
Bottom fishing
[P]3
Depth
0
999
20
1
M/Fm/Ft
[P]3 [P]
Jig length
1
100
2
1
M/Fm/Ft
[P]3 [PP]
Bottom pause
0,5
999,9
2,0
0,1
Second
[P]3 [PPP]
Bottom distance
0
20
2
1
M/Fm/Ft
[P]3 [PPP P]
No of jig
1
25
10
1
St
[P]3 [PPP PP]
Maxium depth
1
999
999
1
M/Fm/Ft
[P]3 [PPP PPP]
Haul up
1
100
50
1
M/Fm/Ft
[P]3 [PPP PPP P]
Menu
[E]
Depth pause
10
1
1
M/Fm/Ft
[E2 P]
Screens in
Bottom fishing
program.
•
No. jigs [P]2[PPP PP]
After the machine has repeated pulling the
Jig length
this amount of times after
last
Bottom detection,
it restarts searching the bottom again.
•
Max depth [P]2[PPP PPP]
is a special feature that is only available in the
Bottom fishing program
to
straighten up the line when used in water with strong current, or when boat drifts away from sinker
location. When
Line out
reaches this depth, the machine will pause the
Bottom fishing program
and
haul up to….
•
Hauling up [P]2[PPP PPP P]
is the amount of line hauled up when
Max depth
is reached. It’s not
described in meter, but in percent of
Max depth.
“
100 %
” will haul up all line to
Zeropoint
. When
hauled up, the
Bottom fishing
program will restart.
Programming
Bottom fishing…
• Press
[P]
rog and check that top row shows
Fish program
. Change
Fishing program
with button
[3]
and
[6]
until row 3 shows "
Bottom fishing
“.
• Press
[P]
rog. Set
Fishing depth
to limit the fishing depth if desired.
• Press
[P]
rog, set
Jig length
.
• Press
[P]
rog, set
Bottom pause
• Press
[P]
rog, set
Bottom distance.
• Press
[P]
rog, set
No. Jigs.
• Press
[P]
rog, set
Max depth
for the feature to straighten up the line, if desired.
• Press
[P]
rog, set
Haul up
percent for the
Max dept
h feature, if used.
• When done, press
[P]
rog or
[E
]nter for
Main screen
For available Catch Detection Sensors in this program, see Table 1 on page Machine - 4
