[P]2 Step Jig Fishing
Step jig fishing means incremental retrieval, Each
Jig length
will be divided into intervals, with interval
pause between.
Otherwise as “Normal fishing”
Two new features are added…
Step length [P]1[PPP]
is the length of the interval drawing.
Step pause [P]1[PPP P]
is the pause between two interval
draws.
Example of wheel behavior with following settings.
Fishing depth [P]1[P]
50 meters,
Jig length [P]1[PP]
7 meters
Step length [P]1[PPP]
2 meters
Step pause [P]1[PPP P]
3 seconds.
1. The machine releases down to 50 meters.
2. Stops and waits the time
Depth pause
.
3. Pulls the
Step length
2 meters
4. Stops and wait
Step pause
3 seconds.
5. From here step 3 and 4 are repeated until
Jig length
(7 meter) is pulled.
6. The machine restarts from step 1.
This procedure is repeated until
Catch mode
occurs or stopped.
Programming of Step Jig Fishing:
• Press
[P]
rog and check that top row shows
Fish program
. Change with
[3]
and
[6]
so row 3 shows
"
Step jig fishing
". Continue to adjust following screens to desired values as for the
Step jig program.
• Press
[P]
rog and set
Fishing depth.
• Press
[P]
rog and set
Jig Length
.
• Press
[P]
rog and set
Step length
.
• Press
[P]
rog and set
Step pause
• When done, press
[P]
rog or
[E
]nter for
Main screen
For available
Catch detection sensors
in this program, see Table 1 on page Machine - 4
Depth
Depth paus
Jig length
Diagram 2
Step jig fishing
Time
Step paus
Step length
[P]2
Screens
Min
Max
Factory
Step
Unit
Navigation
Line ute
0
999
-
1
M/Fm/Ft
Main screen
Fish program
Step jig fishing
[P]2
Fishing depth
0
999
20
1
M/Fm/Ft
[P]2 P]
Jig length
1
100
2
1
M/Fm/Ft
[P]2 [PP]
Hil length
1
100
2
1
M/Fm/Ft
[P]2 [PPP]
Hil paus
0,5
10,0
2,0
0,1
Second
[P]2 [PPP P]
Från Menu
[E]
Depth paus
10
1
1
M/Fm/Ft
[E2 P]
Screens in
Step jig fishing
program
The diagram shows theoretically how the sinker is drawing
on an echo sounder image, with the depth of the vertical
axis and the time on the horizontal.
