The machine automatically saves all changed values to a memory that lasts for 100 years without
any battery power. At startup, Ex loads all values from memory. If an invalid value is found factory
default settings is loaded.
At any time if Ex does not work as intended, a
Reset
of all values can be made by press an hold
the
[Z]
ero button for two seconds. Before program version 1.1538
Reset
always restored back to
factory default settings, but now a
Restore menu
appears instead.
This allows to restore Ex with own pre-saved values, that fits better.
The Restore menu shows…
LOAD [Z1]
Loads all values from what the user previously has saved.
SAVE [Z2]
Saves all values for later being able to be loaded (By
LOAD[Z1]
).
FACTORY [Z4]
Load factory default settings.
Restore affects all values except the theft code it self.
Restore menu is reached by holding
the
[Z]
ero button for two seconds.
Pictures
Navigation
Navigate by press [Z]ero button.
LOAD
vaules
[Z1]
SAVE
values.
[Z2]
Load
FACTORY
values.
[Z4]
[Z1] - [Z2] - [Z4]
Chapter Z LOAD [Z1]
– SAVE [Z2] – FACTORY[Z4]
Table shows units and value limits. See
[E654]
for menu detail level setting. Some screens are not visible if simple view, or normal view are Chosen .
Menu [E651]
