[E51]
– [E52] – [E53]
BRAKE [E51] - DEPTH [E52] - AIR [E53]
SPEED [E51]
– Speed brake
In addition to the constant wheel brake
BRAKE
, there is a brake force
that activates when wheel speed gets too high, it’s the
Speed brake
. It gives temporarily extra
power to clutch, slowing it down to prevent line jerking.
Max speed [E51 PP]
determines the speed
at which the
Speed brake
will activate / deactivate the extra power.
Brake power [E51]
is the
amount of power used during the time
Brake Time [E51P]
.
DEPTH [E52]
–
Depth brake
is activated if the sinker approaches the
Depth
too quickly, for softer
stop. Maximum speed is determined by
Depth brake -
Speed [E52PP]
. The brake is activated if the
calculated time until the
Depth
is reached is less than set
Depth brake - Time [E52P]
. Brake force
is determined by
Depth brake
– Power [E52].
AIR [E53]
– Air brake
is similar to
Speed brake
above and is suppose to be used when hooks and
lines are located above boat deck with risk of being hooked. Therefore
Air brake
is only active close
to the
Zeropoint,
called
Above depth [E53P]
.
Brake time
and
Brake power
used in
Air brake
are
retrieved from
Speed brake
, but the
Air brake
– Speed [E53]
can be lowered.
Air brake - Above depth [E53P]
determines how far from
Zeropoint
the
Air brake
will apply and
where
Speed brake
takes over the control. For a correct function, the
Above depth [E53 P]
should
be set to whatever
Line Out
shows when the last hook leaves the boat.
When any of the three
Speed brakes
are activated, it can be visualized in
Main screen
display in
the
Status field
for troubleshooting or fine tuning. Se chapter
DISPLAY
– Show wheel status
[E615 P]
Screens
Min
Max
Factory
Step
Unit
Navigation
BRAKE
– SPEED [E51]
SPEED BRAKE
– Power
Out
0
20
1
%
[E51]
SPEED BRAKE
– Brake time
0,1
5,0
1,0
0,1
Seconds
[E51 P]
SPEED BRAKE
– Speed
50
900
600
1
RPM
[E51 PP]
BRAKE
– DEPTH [E52]
DEPTH BRAKE
– Power
Out
0
20
1
%
[E52]
DEPTH BRAKE
– Brake time
0,1
5,0
1,0
0,1
Seconds
[E52 P]
DEPTH BRAKE
– Speed
50
900
600
1
RPM
[E52 PP]
BRAKE
– AIR – [E53]
AIR BRAKE
– Speed
50
900
600
1
RPM
[E53]
AIR BRAKE
– Above depth
0
999
0
1
M/Fm/Ft
[E53 P]
Menu [E5]
Table shows units and value limits. See
[E654]
for menu detail level setting. Some screens are not visible if simple view, or normal view are Chosen .
Navigate [E]
Main screen
