[E2]
– [E3]
PAUSE
– Autopause [E2]
is the time it takes after
[A]
uto is pressed until the machine begins to fish. The
break is for the sinker to fall down and stretch the line as straight as possible before it is released. With
Autopause [E2]
, the
[A]
uto button can be pressed when hook has entered into the water without having
to wait.
PAUSE
– Depth [E2P]
is a pause that occurs when
Depth
is reached and the line remains idle before
Jig
Length
commands are made. Available in all
Fishing programs.
CATCH
– Time up [E3]
(This is described under
High load
on page Machine
– 4).
CATCH
– Time down [E3P]
(This is described under
Low speed
on page Machine
– 4).
CATCH -
Speed brake [E3P P
] (This is described under
High speed
on page Machine
– 4).
CATCH - Wheel laps [E3PPP
]. This is described under
Pulled out line
on page Machine
– 4).
CATCH
– LED Brightness [E3PPP P]
Is the power to
Catch LED
, when blinking in
Catch mode
. “0%“
will disconnect the
Catch LED
. While
CATCH - Brightness
screen displays, the power is constantly on for
adjusting the power.
CATCH
– Restart [E3P PPP P]
When motor stops at
Zeropoint
during
Catch mode
up, or by
Stop At
Sea [E442]
,
Restart [E3P PPP P
] can be used to restart the
Fishing mode
. It’s the same as pressing
[A]
uto button.
CATCH
– Show Catch Depth [E3PPP PPP]
decides when
Catch depth
will be displayed."Always at
Catch“ will show
Catch depth
in display during the whole
Catch mode
as normal. "After hauling up" will
show
Catch depth
only after machine Stops at
Zeropoint,
and makes less distraction in display. "Never"
turns of the display of Catch depth off complete. This option is also automtically used in Mackerel
program.
Main screen
Screens
Min
Max
Factory
Step
Unit
Navigation
PAUSE [E2]
PAUSE
– Auto
0,5
10,0
0,5
0,1
Second
[E2]
PAUSE
– Depth pause
0,5
25,0
0,5
0,1
Second
[E2P]
CATCH [E3]
CATCH
–Time up
0,1
10,0
1,0
0,1
Second
[E3]
CATCH
– Time down
1,0
25,0
Out
0,1
Second
[E3P]
CATCH
– At speed brake
Out
IN
Out
-
-
[E3PP]
CATCH
– Wheel laps
Out
33,0
1,0
0,1
Wheel laps
[E3PPP]
CATCH
– LED Brightness
Out
100
100
1
%
[E3PPP P]
CATCH
– Restart
Out
99,9
Out
0,1
Second
[E3PPP PP]
CATCH
– Show Catch depth
Never / After hauling up / Always at catch
[E3PPP PPP]
PAUSE [E2] - CATCH [E3]
Table shows units and value limits. See
[E654]
for menu detail level setting. Some screens are not visible if simple view, or normal view are Chosen .
Menu [E]
