BELGACOM Belgafax 170ts, Руководство пользователя

Страница: 10 / 40

10
Inst
al
la
ti
on
You can connect additional devices to the same
telephone socket. Make sure the fax machine is
the
fi rst device connected to the line.
Variant 1
Variant 2
v
In different rooms : You can connect ad-
ditional devices to separate sockets. This is
a so called pararell connection. In this case,
the use of your fax machine is limited, e.g.
it is not possible anymore to receive faxes
silently.
Easy Install
Using EASY INSTALL your fax machine will be
con fi gured according to your local conditions.
1
Press
w
for at least two seconds. Your fax
machine will print one page. Pull out the page
fi rmly and follow the instructions.
2
Your fax machine will then guide you on the
display through the fi rst settings such as your
fax number and your name.
3
Afterwards you need to enter the current time
and date. Use the dial pad to enter the correct
time and date. Con
fi rm with
OK
.
Private branch exchange
Private branch exchange systems are very com-
mon in large companies. ISDN connections are
private branch exchanges and are used very often
in private households. To get a connection from
a private branch exchange to the public network
you have to dial a key to obtain the outside line.
1
Select function 15 by pressing
M
and then
entering the digits 15 . Press
OK
.
2
You can switch on the PABX operation using
u .
PABX: YES
PABX: NO
3
Then press
OK
.
4
Now enter the key that has to be pressed to
obtain an outside line.
This outside line access code must be obtained
from the manufacturer. This is either
0
or
R
(in some systems also described as FLASH) or a
number key.
5
Press
OK
.
6
Use u to select
CHECK: YES
and press
OK
.
Your machine will then check that the outside line
can be obtained. If the check is successful, brie fl y
appears:
check OK
.
If the check is successful, brie fl y appears:
check OK
.
You will be asked to repeat the entry. Change the
outside line access code. If you have entered the
correct code but the display nevertheless reads
check NOT OK
then delete the code by pres-
sing
C
.