Technical Manual
LioN-Link PROFINET
Subject to change without notice!
Version 1.2 / August 2014
Page 24 of 30
The homepage gives an overview over the characteristics of the BusHead regarding system, LioN-Link and PROFINET. The system
characteristics comprise information concerning the firmware versions, serial number and a counter (Rev. Counter), which is
increased by one with each change of a parameter (IP-address, device name) on the BusHead.
In the section „LioN Link Information “you find the number of connected I/O modules per line, the actual conditions of the two
LioN Link lines and information concerning the presence of a diagnostics at a line.
7.2.
The configuration page (Configuration)
With the selection of the menu item
Configuration
on the left side of the homepage you are requested to enter a user name
and a password.
Enter “Admin“ as the user name and “Belden601“ as the password. Pay attention to the upper case and lower case. After the
input the following window appears:
On this page you can change the IP-address of the BusHead, the subnet mask and the PROFINET device name. The changed
values are accepted by a click on the button “
OK
” behind the lettering “
Submit new values
“. Please pay attention to possibly
adapt your network settings and PLC configuration after transmitting the values.
Click on the button “
OK”
behind the lettering “
Reset to factory settings”,
to restore the factory settings of the BusHead. Please
note that the PROFINET name is herby deleted and the IP-address is reset to the value 0.0.0.0.
