Technical Manual
LioN-Link PROFINET
Subject to change without notice!
Version 1.2 / August 2014
Page 5 of 30
1.2.
Safety guidelines
1.2.1.
Normal conditions of use
The devices that are explained in this manual are intended to be used as decentralized Input / Output assemblies in a PROFINET
network.
Our products are designed, manufactured, tested and documented with respect to common safety standards. With attention to
the handling specifications for planning, development and mounting and the safety instructions our products do not cause any
danger to persons and property under normal conditions.
The modules comply to the rules of the
EMC-directive (89/336/EWG, 93/68/EWG und 93/44/EWG)
Low voltage directive (73/23/EWG)
They are designed to be used in the industrial area. The industrial environment is characterized by the fact that electrical
consumers are not connected directly to the public low voltage network. For the application in residential areas, business areas
and commercial areas additional measures are to be taken.
Caution!
This equipment can cause interferences in the residential area. In this case the operator can be required to
accomplish appropriate measures.
The proper and safe function of the product requires an appropriate transport, storage, installation and mounting as well as a
careful operation.
The intended operation of the device is only guaranteed with a completely installed housing. All devices connected to this
equipment must fulfil the requirements of the EN 61558-2-4 and EN 61558-2-6.
Projecting, installation, commissioning, maintenance and test of the devices may be carried out only by an approved qualified
electrical specialist who is familiar with the security standards of the automation technology.
During projecting, installation, commissioning, maintenance and test of the devices the regulations for safety and prevention
of accidents in the specific application case have to be considered.
Only cables and accessories shall be installed that correspond to the requirements and regulations for safety, electromagnetic
compatibility and if necessary telecommunication terminals as well as the specification data.
More information about the admitted cables and accessories for installation may be obtained from Belden Deutschland –
Lumberg Automation- or are described in this technical manual.
