Belden Grass Valley KALEIDO-X16, Инструкция по установке и обслуживанию

Страница: 92 / 152

92
System Configuration
Configuring an Audio Bridge Terminal
5 Using a Web browser on the PC, connect to the ABT using the following address:
10.0.3.190.
The home page of the ABT’s built-in Web server is displayed.
6 Click Network Configuration (in the navigation pane).
The Network Configuration page is displayed.
7 Change the ABT’s network settings, as necessary, and then click Apply & Reboot .
For more information about the ABT, refer to the Audio Bridge Terminal Guide to Installation
and Operation ; see Related Documentation , on page 15.
Property Setting
DHCP OFF
Static IP address 10.0.3.190
Subnet mask 255.255.0.0
Default gateway 10.0.0.1
Notes
• The
Kaleido-X16
supports one ABT device. You can achieve redundancy
by connecting the ABT to more than one input card, in which case the
Kaleido-X16
uses the signal from the input card that is the farthest from
the output cards (for example, Input D, if you have 4 input cards, Input C if
you have 3 input cards, Input B if you have 2 input cards).
• Keep in mind that all ABTs ship with the same default static IP address. If
you are adding more than one ABT to your network and do not use DHCP,
make sure to assign each ABT a different static IP address before
connecting them to the network.