Belden Grass Valley KALEIDO-X16, Инструкция по установке и обслуживанию

Страница: 80 / 152

80
System Configuration
Viewing a Multiviewer’s Status Information
• Some heading rows may show a card type, serial number, firmware and safe mode
versions, a module status indicator, and input signal status indicators.
• You can identify which output card currently assumes the software master role (and
is thus assigned the multiviewer’s IP address) by looking for the word “master” next
to the card’s identifier, for example: “OUTPUT A (master)”.
• The module status indicator shows whether the card (or module) is running
normally (green) or in safe mode (red).
• The signal status indicators reveals the presence of a valid input signal at the
corresponding connector.
2 Move the pointer to an input signal status indicator to view the associated signal
format.
3 Click the arrow button at the end of a module’s heading row to view more detailed
information about this card or multiviewer.
• At any time you can click the Refresh button to make sure the data displayed for
the selected module is up to date.
• Click the “Reset card” button to reset the card or reset the multiviewer remotely
from your Web browser.
Note:
The Kaleido Software does not distinguish neither between
1080PsF25 and 1080i50, nor between 1080PsF29.97 and 1080i59.94. Both
1080PsF25 and 1080i50 are reported as 1080i50, and both 1080PsF29.97 and
1080i59.94 are reported as 1080i59.94, on the monitor wall and in XAdmin’s
Status and Options page.
Card type Serial number
Version information
Input signal status
Input signal format
Status indicator
Expand details
Refresh
Reset card