Belden 934 815-001, Техническое руководство

Страница: 12 / 72

Safety instructions
8
2.2 Qualified personnel
Technical manual LioN-Link BusHead EtherNet/IP™
Release 1.1 04/2016
A completely assembled device housing is required for the proper operation
of the LioN Link BusHead EtherNet/IP. Only connect the LioN Link BusHead
EtherNet/IP to equipment/machines that are controlled by the LioN Link
BusHead EtherNet/IP.
During the configuration, installation, start-up, maintenance and testing of the
equipment/machines controlled by the LioN Link BusHead EtherNet/IP,
adhere to the safety and accident-prevention guidelines valid for the specific
application.
Only install cables and accessories that fulfill the requirements and
regulations for safety, electromagnetic compatibility, and, where applicable,
telecommunication end devices, as well as the specification information.
Information on which cables and accessories are permitted for the
installation can be obtained from Lumberg Automation™ or is contained in
this manual.
2.2 Qualified personnel
The configuration, installation, start-up, maintenance and testing of the LioN
Link system may only be performed by a qualified electrician who is familiar
with the safety standards in automation technology.
The personnel requirements are based on the requirement profiles described
by ZVEI, VDMA, or equivalent organizations.
Only electricians who are familiar with the content of this manual are
authorized to install and maintain the described LioN Link system. These are
persons who

based on their technical training, knowledge, and experience, and their
knowledge of the pertinent standards, can evaluate the work to be carried
out and identify any potential risks or

based on working for several years in a related sector, have the same
level of knowledge as they would have from the relevant technical
training.
Only Belden Deutschland GmbH – Lumberg Automation™ – is permitted to
make changes to the hardware or software of the products that go beyond
the scope of this manual.