Belarus 1025/1025.2/1025.3
Section F. Ganging up
F14
Outside screw ties (2)
Partial interlock
Horizontal machine displacement in
operational position is provided by
coupling arresting chains to lower
openings of arms (1) and adjusting length
of chains by means of ties (2) to obtain an
implement swinging to each side at least
125 mm, as per machine operation
manual directions. When operating
ploughs set length of the right-hand brace
to depth of tillage.
ATTENTION!
Be sure to maintain
machine swinging at 125 mm to avoid
breaking of chains when lifting the
machine to transport position.
When setting machine to transport
position tighten chains by means of ties
(2). Machine can swing to both sides 20
mm maximum.
Full interlock
To fully interlock the machine in
operational condition couple arresting
chains (20 to the second lowest opening
of arm (1) and shorten length of chains
(2) to minimum.
In transport position the interlock is
provided automatically.
