Belarus 1025/1025.2/1025.3
Section D. Controls and instruments
D27
The seat of «Belarus»
has the following adjustments :
According to operator’s mass
Handle (1) is used for this purpose. To
adjust the seat to greater mass put latch
of handle 1 to position A and by
reciprocating movement tighten springs.
To adjust the seat to lower mass shift
latch to position B and by reciprocating
movement release springs.
Adjustment of seat-back tilt.
Use hand wheel (2) to make
adjustment. To increase seat-back
inclination angle turn the hand wheel
(2) clockwise, and anti clockwise to
reduce it..
Longitudinal back-seat
adjustment.
Use handle (3) to make
adjustment. To move the seat “forward-
backwards” pull the handle upwards,
shift the seat and then release the
handle, and the seat will automatically
be fixed in required position.
Height adjustment.
The seat has
three positions by height «lower»,
«middle» and «higher». To shift the seat
from «lower» to «middle» or from
«middle» to «higher» position smoothly
lift the seat up till the ratchet and pawl
mechanism and characteristic click is
audible.. To shift the seat from«higher»
to «lower» position sharply lift it to the
end and lower down.
NOTE!
The seat can not be shifted
from «middle» to «lower» position.
.
