Belarus 1025/1025.2/1025.3
Section G.
Scheduled maintenance
G 31
To adjust parking brake:
•
Put the tractor on the even terrain, shut
down the diesel and lock rear wheels from
front and back sides:
•
Shift lever (1) to extreme front
(disengaged) position.
•
Loosen check nut (3) of adjusting bolt (2)
of the parking brake (on the right-hand
tractor side).
•
By screwing in or unscrewing bolt (2), find
position when with effort on lever (1)
equal 200 N (20 kgf), full engagement of
the parking brake was achieved on the
third-fourth tooth of sector (A).
•
Secure bolt (2) with nut (3).
When the tractor is equipped with
pneumatic system and operates with
trailers provided with pneumatic brakes,
make the following adjustments of the
parking brake:
•
Shift lever (1) to extreme front
(disengaged) position.
•
Loosen check nut (8) and pull out pin
(6).
•
Move lever (5) so that upper edge of
groove «
В
1» of lever (4) matched upper
edge of groove «
В
2» of lever (9).
•
Changing length of tie-rod (10) by
rotating yoke (7), connect tie-rod (10)
to lever (5) using pin (6), and secure it
with cotter pin.
•
By screwing in or unscrewing bolt (2), find
position when with effort on lever (1)
equal 200 N (20 kgf), full engagement of
parking brake was achieved on the third-
fourth tooth of sector (
А
).
•
Tighten check nut
(3) и (8).
