BELARUS-1021/1021.3
Operating manual
39
3.13 Changing steering wheel position
To change the two-arm steering wheel
height position, proceed as follows:
- remove the cover (2);
- unscrew the clamp (1) by 3...5 turns;
- move the steering wheel (3) to the
desired position;
- tighten the clamp (1) by hand and put the
cover (2) to place.
- the adjustment range of the steering
wheel height is 100 mm.
To change the three-arm steering wheel
height position, proceed as follows:
– unscrew the clamp (1) by 3...5 turns;
– move the steering wheel (2) to the
desired position;
– tighten the clamp (1) by hand.
– the adjustment range of the steering
wheel height is 100 mm.
The steering column can be tilted and
fixed in four positions from 25° to 40° with a
5° step. To tilt the steering column, pull the
lever (1), tilt the steering column to a
convenient working position, and releasing
the lever (1), gently sway the steering
column in the longitudinal direction until it
fixes securely.
With the steering column fixed in its full
forward position, shift the gearshift lever
(34) (Figure on page 23) to the Neutral
position, then shift it to the leftmost position
and, holding it in this position up to the full
start of the engine, start the engine. Then,
with the tractor standing still, make sure the
steering operates normally.
Two-arm steering wheel height adjustment
Three-arm steering wheel height adjustment
Содержание 1021
Страница 1: ...BELARUS 1021 1021 3 1021 0000010 OM OPERATING MANUAL Minsk Tractor Works 2010 ...
Страница 16: ...BELARUS 1021 1021 3 Operating manual 15 The transmission number Front driving axle number Cab serial number ...
Страница 107: ...BELARUS 1021 1021 3 Operating manual 106 Fig 6 9 2 Determining maximum allowable torque Power kW hp Speed rpm Torque Nm ...