BELARUS-1021/1021.3
Operating manual
198
It is permitted to store pneumatic tires in
unloaded state on tractors installed on
supports. Apply a protective composition to
the tires. Lower the tire pressure to 70% of
normal for indoors or open-yard storage.
Clean outer surfaces of the hydraulic system
flexible hoses of dirt and oil. It is allowable to
store hoses on the machine. At that, cover
them with protective composition or wrap
around with insulating material (such as
waxed paper, polyethylene film, etc.).
To ensure free exit of water and
condensate from the cooling system, leave the
drain devices open. Close the hoods and the
cab doors.
When performing maintenance of the
machines during storage, check correct
installation of the machines on supports or
pads (no warps), completeness, tire pressure,
reliable sealing, condition of corrosion-
resistant coatings (availability of protective
grease, integrity of paint, no corrosion),
condition of protective devices (integrity and
strength of safety enclosures, covers).
Eliminate all found faults.
Maintenance of the tractor when removing
it from storage involves taking the tractor off
the supports, cleaning, and if necessary
depreservation of the tractor, components,
removal of sealing devices, installation of
removed parts, tools to the tractor, checking
operation and adjusting the tractor and its
parts.
9.2 Requirements to inter-shift
storage of machines
The tractor can be stored on yards and
places of inter-shift storage or directly on the
place of works. Tightly close with cover all
holes, through which precipitation can
ingress internal cavities of the tractor. The
storage batteries must be disconnected.
9.3 Requirements to short-time
storage of machines
Install the tractor for storage complete
without removing tractor units and
assemblies.
Disconnect the storage battery. The
electrolyte level and density must conform to
the recommendations for maintenance and
servicing of storage batteries. When storing
tractors at low temperatures, or during more
than one month, remove the batteries and sent
to warehouse.
9.4 Requirements to long-time storage
of machines on open yards
Preparing the engine for long-time storage
includes preservation of the surfaces of parts
located inside the engine (internal
preservation) and flushing the cooling system,
sealing the inner surfaces, preservation of
exterior unpainted surfaces of the engine
(exterior preservation), packing the engine
into an enclosure polymer film when no hood
is available. When there is no fuel in the fuel
tanks, preservation must be done with use of
volatile inhibitors. Clean and rinse the air
cleaner, fill operating preservation oil to the
tray.
Clean and lubricate threaded connections
of the hitch mechanism, hydraulic systems,
steering linkages, etc.
9.5 Preservation
Temporary corrosion protection of tractor
units and systems from environmental impact
during transportation and storage of the
tractor is provided by preservation.
Clean all tractor surfaces to preserve of
mechanical impurities, degrease and dry.
Preservation is made to unpainted interior and
exterior surfaces with galvanized coating,
viewed units of the tractor and in the cab by
applying rust-preventive oil RUST BAN 397.
SUMIDERA 397. Material consumption is
0.02 to 0.03 kg per tractor.
Содержание 1021
Страница 1: ...BELARUS 1021 1021 3 1021 0000010 OM OPERATING MANUAL Minsk Tractor Works 2010 ...
Страница 16: ...BELARUS 1021 1021 3 Operating manual 15 The transmission number Front driving axle number Cab serial number ...
Страница 107: ...BELARUS 1021 1021 3 Operating manual 106 Fig 6 9 2 Determining maximum allowable torque Power kW hp Speed rpm Torque Nm ...
