BELARUS-1021/1021.3
Operating manual
119
6.13.1.11 When driving on public roads, observe the following requirements:
- drive only with the flashing beacon on;
- do not use the working headlights, because this leads to dazzling of other road users;
- driving the tractor in a unit with agricultural machines with filled tanks (process material
such as fertilizers, seeds, etc.) on public roads is prohibited.
6.13.2 Safety precautions for intended use of tractor and machines in MTU
6.13.2.1 Use the tractor and machines, separately and as MTU parts, only in accordance
with their intended purposes as specified in the operation documentation for the tractor and the
unitized machine in the conditions and modes as set forth by the manufacturer. Use of technical
tools, including the tractor, for any other purposes is deemed to be improper use. The manufacturer
is not liable for damages resulting from such a use of the unit. In this case, the responsibility falls
on the user. The concept of intended use also includes compliance with the operating, maintenance
and service conditions as prescribed by the manufacturer. Use of the tractor and machines, their
maintenance and service must be performed by the personnel qualified for this.
6.13.2.2 Observe the relevant regulations on accident prevention: common safety rules,
health recommendations for labor safety, traffic rules.
6.13.2.3 Unauthorized changes in the unit design releases the manufacturer from liability
for any damage resulting from it. This is equally applicable to those cases where defective units
were disassembled or repaired improperly; using incomplete tractors or cars, or in a package
different from the specifications, as well as in case of replacement of factory original parts and
assemblies with other special or non-original not specified by the manufacturer, and when seals are
broken.
6.13.2.4 It is forbidden to unitize tolls with the tractor if the results of weighing,
calculations, and ballasting yield vertical statics load on the axles, tires, TC and HL of the tractor
exceeding the allowable values and ones specified in the tractor manual.
6.13.2.5 In order to ensure handling, stability and stable towing and braking qualities,
especially on fields sites with slopes and soft soils, we recommend to ensure a load the front
driving wheels of the tractor in the MTU of 25 ... 40% of the standard operating weight of the
tractor.
6.13.2.6 Before starting to work, always inspect the tractor in the MTU on traffic and
operation safety.
6.13.2.7 Observe all generally accepted regulations for safety and accident prevention
specified in instructions on labor protection.
6.13.2.8 The plates on the unitized machines contain important warnings and instructions
for safe operation.
6.13.2.9 Before starting to work, familiarize yourself with the design of the mounted
machine, controls and functions performed.
6.13.2.10 Garment of the people working on the tractor must be tight fitting. Wearing loose
clothing is not allowed.
6.13.2.11 To avoid fire, keep clean the tractor and machines.
6.13.2.12 Before starting the tractor and beginning its operation, make sure that no one is
near the tractor and the machine.
6.13.2.13 Attach machines to the tractor strictly according to this operating manual and
operating instructions.
6.13.2.14 Take special care when attaching machines to the tractor and when disconnecting
them. When attaching or disconnecting tools, make sure that the supporting devices used are in the
correct position. Assess stability.
Содержание 1021
Страница 1: ...BELARUS 1021 1021 3 1021 0000010 OM OPERATING MANUAL Minsk Tractor Works 2010 ...
Страница 16: ...BELARUS 1021 1021 3 Operating manual 15 The transmission number Front driving axle number Cab serial number ...
Страница 107: ...BELARUS 1021 1021 3 Operating manual 106 Fig 6 9 2 Determining maximum allowable torque Power kW hp Speed rpm Torque Nm ...
