FLIPPING™ ARCH
24
Belanger, Inc.® *PO BOX 5470 *Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
1MANUL027
Installation
Initial Start Up
4) Verify that the Leg Manifold Assemblies ROTATE correctly.
Verify that the Leg Manifold assemblies both rotate 30° from center toward the
entrance of the wash and 30° from center toward the exit of the wash. See the
image below.
5) Run a test wash on a vehicle.
6) Program the
Flipping
™
Arch so that it activates just before the front bumper of the
vehicle comes in contact with the spray application.
7) Program the air panel so that the 4-way valve activates when the spray application is at
the side rear view mirrors.
Note:
Activation of the 4-way valve will rotate the spray manifolds so that they face the exit and
allow for complete coverage of the mirrors and the rear of the vehicle.
8) Verify that there are no air or water leaks at any of the hose connections or nozzles.
Nozzle (4) for
Each Leg Manifold
Assembly
Leg Manifold Assembly (2)
30°
Toward
Entrance
30°
Toward
Exit
Check Body (4) for
Each Leg Assembly
Spray Manifold
