Beko WMB 710311 D, Руководство пользователя

Страница: 21 / 64

21
EN
Canceling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
1. Set the Delayed Start period to zero or
turn the Programme Selection knob to
any programme. Thus, Delayed Start
function will be canceled. The End/
Cancel light flashes continuously.
2. Then, select the programme you want to
run again.
3. Press Start / Pause button to start the
programme.
Starting the programme
1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing the
startup of the programme will turn on.
C
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode and
the illumination level of the temperature,
speed and loading door indicator lights
will decrease. Other indicator lights
and indicators will turn off. Once the
Programme Selection knob is rotated
or any button is pressed, indicator lights
and indicators will turn on again.
Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
C If the Programme Selection knob is
turned when the Child Lock is active,
"Con" appears on the display. The
Child Lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
C Even if another programme is selected
with the Programme Selection knob
while the Child Lock is active, previously
selected programme will continue
running.
To activate the Child Lock:
Press and hold 1
st
and 2
nd
Auxiliary Function
buttons for 3 seconds. The lights on the 1
st
and 2
nd
Auxiliary Function buttons will flash,
and "C03", "C02", "C01" will appear on
the display respectively while you keep the
buttons pressed for 3 seconds. Then, "Con"
will appear on the display indicating that
the Child Lock is activated. If you press any
button or turn the Programme Selection knob
when the Child Lock is active, same phrase
will appear on the display. The lights on the
1st and 2nd auxiliary function buttons that are
used to deactivate the Child Lock will blink 3
times.
To deactivate the Child Lock:
Press and hold 1
st
and 2
nd
auxiliary function
buttons for 3 seconds while any programme
is running. The lights on the 1
st
and 2
nd
Auxiliary Function buttons will flash, and
"C03", "C02", "C01" will appear on the
display respectively while you keep the
buttons pressed for 3 seconds. Then,
"COFF" will appear on the display indicating
that the Child Lock is deactivated.
C In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On / Off
position when no programme is running,
and select another programme.
C
Child Lock is not deactivated after
power failures or when the machine is
unplugged.
Progress of programme
Progress of a running programme can
be followed from the Programme Follow-
up indicator. At the beginning of every
programme step, the relevant indicator light
will turn on and light of the completed step
will turn off.
You can change the auxiliary functions, speed
and temperature settings without stopping
the programme flow while the programme
is running. To do this, the change you are
going to make must be in a step after the
running programme step. If the change is
not compatible, relevant lights will flash for 3
times.
C
If the machine does not pass to the
spinning step, Rinse Hold function might
be active or the automatic unbalanced
load detection system might be activated
due to the unbalanced distribution of the
laundry in the machine.
Loading door lock
There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
Loading door light will start flashing when
the machine is switched to Pause mode.
Machine checks the level of the water inside.
If the level is suitable, Loading Door light
illuminates steadily within 1-2 minutes and
the loading door can be opened.
If the level is unsuitable, Loading Door light
turns off and the loading door cannot be
opened. If you are obliged to open the
Loading Door while the Loading Door
light is off, you have to cancel the current