Beko BEKOMAT 14i Скачать руководство пользователя | Manualshive

Страница: 7 / 76

background image

2.1.2 Reasonably foreseeable inappropriate use

Reasonably foreseeable inappropriate use is deemed to have occurred if the product or the accessories are used in any
other way than that described in the chapter "Intended use". Reasonably foreseeable inappropriate use includes the use
of the product or the accessories in a manner not intended by the manufacturer or supplier but which may result from
foreseeable human behaviour.
Reasonably foreseeable inappropriate use includes:
•

The execution of any kind of modification, in particular constructive and process-technology related interventions.

• The suspension, bridging or non-application of existing or recommended safety equipment.

This list is not exhaustive as not all possible inappropriate use can be foreseen in advance. If the operating company
is aware of any inappropriate use of the product or accessories which are not listed here, the manufacturer must be
informed immediately.

2.2 Responsibility of the operating company

The responsible operating company must ensure the following to prevent accidents, incidents and adverse effects on the

environment:
•  Before all actions, check to ensure that the manual available does in fact belong to the product.
•  The product and the accessories are used, serviced and repaired in accordance with the intended use.
•  The product and accessories are only used with the recommended and fully operable safety equipment.
•

All assembly, installation and maintenance work is carried out by qualified skilled technical personnel only.

•  Personnel have the necessary personal protective equipment available and also use this equipment.
•  Suitable technical safety measures are taken so that the permissible operating parameters are adhered to.
•  Keep all safety symbols and the type plate on the product in a legible state. Replace damaged and illegible marking

immediately.

Original installation and operation manual

BEKOMAT

®

14i / 14i CO / 14i CO PN25

7 | 76

«
...
5
6
7
8
9
...
»

Содержание BEKOMAT 14i













































































Отзывы:

Нет отзывов

Похожие инструкции для BEKOMAT 14i

Бренд: Oase Страницы: 20

Бренд: GC Water Страницы: 16

Бренд: WaterGroup Страницы: 24

Бренд: Barnstead Thermolyne Corporation Страницы: 32

Бренд: Kelvinator Страницы: 16

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 26

Бренд: Philips Страницы: 84

Бренд: Philips Страницы: 88

EasyVEC 11034474

Бренд: aldes Страницы: 20

Бренд: DiaSys Страницы: 50

Бренд: SPEL Страницы: 17

$Val-Tex QS-2200A Operating Manual preview$

Бренд: Val-Tex Страницы: 25

PURO QUADRO 800

Бренд: BORETTI Страницы: 32

Бренд: Wyckomar Страницы: 7

Бренд: Grant Страницы: 12

Бренд: ComAp Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды