Beko B49L 8840, Руководство пользователя

Страница: 207 / 344

Television / User Manual
93 / 115 TR
SETTING FURTHER CHANNELS
-----------------------------------------------------
Antenna settings, SCR system
and searching for digital chan-
nels from a satellite automati-
cally
Notes:
7
Your TV supports SCR system (Single Chan-
nel Router – EN 50494).
7
The following description about the LNB set-
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
1
Open the menu with »
MENU
«.
2
Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »
OK
« to confirm.
3
Select the menu item »Source« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Source« menu is active.
4
Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press »
OK
« to
confirm.
5
Select the option »Satellite (DVB-S/S2)«
with »
V
« or »
Λ
« and press »
OK
« to
confirm.
6 Select the line »Antenna Settings« with »
V
«
or »
Λ
« and press » OK « to confirm.
– The »Antenna Settings« menu is dis-
played.
7
Select and set the required option for the
antenna settings with »
V
« or »
Λ
«:
Satellite
Press »
OK
« then select the required satel-
lite with »
V
« or »
Λ
« and press »
OK
« to
confirm.
LNB type
If your antenna system is equipped with
a single-cable system multiswitch, use the
option »SCR«. Press »
OK
« and select the
»SCR« option with »
<
« or »
>
«.
Select the »LNB-Frequency High« line with
»
V
« and enter the frequency with »
1...0
«
in five digits.
Select the »LNB-Frequency Low« line with
»
V
« and enter the frequency with »
1...0
« in
five digits.
Confirm the settings with »
yy
« (green).
LNB Selection
Depending on the number of LNBs, select
the option with »
<
« or »
>
«.
»1/2« if only 1 LNB is used; if two LNBs are
used, select the required LNB
(»1/2« or »2/2«).
User Band
Select the number of the antenna socket
used with »
<
« or »
>
«.
UB Frequency (MHz)
Enter the required frequency for the selected
antenna socket with »
1...0
«.
Notes:
7
Use installation equipment supported / sug-
gested by your SCR Switch.
7
Other users / receivers connected to the
system may be affected if the specified user
band number and frequency is changed
during installation.
7
User band and user band frequency is
specified on the SCR switch used; and each
user / receiver must select a specified user
band and user band frequency.
7
With SCR satellite system, auto search by
several users / receivers at the same time
may cause problems.
8 Exit the antenna settings with »
yyyy
« (blue).
9
Select the Channel Type.
Press »
V
« or »
Λ
« to select whether you
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (D Radio) and press »
OK
« to
select and mark or unmark the »Digital«
and/or »Radio« items.