Beko B49L 8840, Руководство пользователя

Страница: 201 / 344

Television / User Manual
87 / 115 TR
NETWORK SETUP
-------------------------------------------------------------------------------------------
Note:
7
For device to discover the wireless modem
on the network, the network name should
support ASCII characters.
10 Select the required character with »
V
«,
»
Λ
«, »
<
« or »
>
« and move to the next
character with » OK «.
– Using » Shift « ° » OK «, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– Select » Del « to delete the character
entered and press » OK « to confirm.
11
Confirm the password with »
yy
« (green).
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
12
Press »
yy
« (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
13
Press »
EXIT
« to end the setting.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.
Manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Address«, »Netmask«, »Gateway« and
»DNS« values (IPS) from your Internet Service
Provider.
1 Open the menu with » MENU «.
2
Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »
OK
« to confirm.
3
Select the menu item »Network« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Network« menu is active.
4
Select the line »Change Connection Type«
with »
V
« or »
Λ
« and press »
OK
« to
confirm.
5
Select the option »Wireless« with »
<
« or
»
>
« and press »
OK
« to confirm.
– WiFi warning screen will be displayed.
6
Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
<
« or »
>
« and
press »
OK
« to confirm.
7
Select the line »Network Configuration«
with »
V
« or »
Λ
« and select the option
»Manual« with »
<
« or »
>
«.
– »IP Address«, »DNS«, »Netmask« and
»Gateway« options are active.
Change Connection Type Wired
WiFi On
Select Access Point N/A
Network Configuration Manual
Wake-on-LAN Off
IP Address 192 . 168 . 000 . 200
Picture
Tuesday
xx xxx xxxx
Source Timer Sound Network TV
Settings > Network
Change Area Connect Test Connection Input Mode Exit Back EXIT BACK
8 Select the line »IP Address« with »
V
«.
Enter IP address with » 1…0 «.
9
Select the line »DNS« with »
V
«.
Enter DNS address with »
1…0
«.
10
Select the line »Netmask« with »
V
«.
Enter Netmask address with »
1…0
«.