PF1352 USER MANUAL REV A 12/21/15
•
Initiate
the
Trigger subsystem: use the
INITiate:SEQuence
button, or set
INITiate:CONTinuous
ON to initiate the event.
•
ABORt
button can be used to abort the trigger event.
OPER?
button can be used to get the
TRIGger
subsystem state. The Operation Event
register has two bits, WTRG (Wait for Trigger, bit 5) and SWEeping (Trigger Event in
Process, bit 3) that define the
TRIGger
subsystem state.
6.3.4 STATUS TAB
Figure 6-6 shows the Status Tab, which contains the SCPI status commands for the
power supply. The user can query the power supply for the operational, questionable,
status byte and standard event status registers.
Figure 6-6 Status Tab
Figure 6-6 shows the Status Tab, which contains the SCPI status commands for the
power supply. The user can query the power supply for the operational, questionable,
status byte and standard event status registers.
