1.2 Scope of Supply
1 UNITEST TELARIS 0100-ELECTROcheck
1 Test lead with shock-proof plug 1.5 m
3 Test leads 1.5 m
3 Test probes
3 Alligator clamps
1 Carrying holster
6 Batteries 1.5 V, IEC LR6
1 Instruction manual
2.0 Transport and Storage
Please keep the original packaging for later trans-
port, e.g. for calibration. Any transport damage due
to faulty packaging will be excluded from warranty
claims.
In order to avoid instrument damage, it is advised
to remove batteries when not using the instrument
over a certain time period. However, should the in-
strument be contaminated by leaking battery cells,
you are kindly requested to return it to the factory
for cleaning and inspection.
Instruments must be stored in dry and closed areas.
In the case of an instrument being transported in ex-
treme temperatures, a recovery time of minimum 2
hours is required prior to instrument operation.
3.0 Safety
Measures
The UNITEST ELECTROcheck has been designed
and checked in accordance with the safety regula-
tions for Electronic test and Measurement Instru-
ments EN 61010 and IEC 61010, and left our facto-
ry in a safe and perfect condition. In order to
maintain this condition and to ensure safe opera-
tion, the operator must respect the references and
warnings contained in this instruction manual.
The respective accident prevention regulations
established by the professional association for
electrical systems and equipment must be
strictly met at all times.
In order to avoid electrical shock, the valid safe-
ty regulations regarding excessive contact
voltages must receive the utmost attention
when working with voltages exceeding 120V
(60V) DC or 50V (25V)rms AC. The values in
brackets are valid for limited ranges (as for ex-
ample medicine and agriculture).
Measurements in dangerous proximity of elec-
trical installations are only to be executed when
instructed by a responsible electrical special-
ist, and never alone.
Prior to usage, inspect the instrument and used
test leads for external damage. Prior to any op-
eration, ensure that connecting leads used and
instruments are in perfect condition.
5
Transport and Storage / Safety Measures
PTDB90510001.qxd 02.03.2006 12:23 Uhr Seite 49
