GT-600/GT-800 Instruction Manual
51
Memory Features
When saving test results every test result must obligatory be dedicated to an
Appliance (APP). Besides Client (CLI), Site (SIT), Location (LOC) and Description
(DES) can optionally be assigned to saved test result.
Above mentioned data (APP and optionally CLI, SIT, LOC and DES) must be
entered / selected before storing measurement results.
Operator must be entered via menu OPERATOR before carrying out the
measurements as it is attached to any measurement result immediately after
finishing the measurement.
APP : Appliance code (max. 17 characters) (STANDARD Barcode mode, see
page
49)
APP
: AUTO Test code (first 3 characters) and Appliance code (next max 14
characters) (COMBINED Barcode mode, see page 49)
CLI : Client/customer (max. 17 characters)
SIT : Site (max. 17 characters)
LOC : Location/department (max. 17 characters)
DES : Description of appliance (max. 17 characters)
Date (from RTC) and operator are attached to any measurement result
automatically after finishing the measurement.
In software es control the field “APP” (appliance) is assigned to “Appliance”,
field “CLI” (client) is assigned to “Client”, field “SIT” (site) is assigned to
“Site”, field “LOC” (location) is assigned to “Location” and field “DES”
(description) is assigned to “Remarks”.
