BEFCO DR0-308, Руководство оператора

Страница: 16 / 52

until the PTO speed indicated on the rake is obtained. PTO speed may vary from 400
rpm to 540 rpm. Never exceed 540 rpm.
Shift the transmission to a slow speed gear and start forward, increase the ground
speed by shifting upward until the desired speed is obtained.
CAUTION: Do not operate this windrower rake at a PTO speed or direction of
rotation other than that shown on the windrower rake. Serious damage can occur
to the machine and/or the operator.
Before starting work, never forget that the operator is responsible for the following:
1. Safe and correct driving of the tractor and windrower rake.
2. To learn precise safe operating procedures for both the tractor and the windrower
rake.
3. To ensure all maintenance and lubrication has been performed on the windrower
rake.
4. To have read and understood all safety aspects for the windrower rake in the
operator’s manual.
5. To have read and understood all safety decals on the windrower rake.
6. Checking the condition of the tines. Worn or damaged tines should be changed
before starting.
7. Checking that there is no wire, weed, grass or other material wrapped around rotors
or tines.
8. Checking to see if front weights need to be added to the tractor in order to maintain
balance.
9. Checking the tractor tires for the proper pressure in accordance with the tractor’s
operator’s manual.
10. Checking that the PTO shield and all other shielding are on the machine and
securely in place .
11. Making sure the proper attire is worn. Avoiding loose fitting clothing which can
become entangled. Wearing sturdy, tough-soled work shoes and protective
equipment for eyes, hands, ears and head. Never operate tractor or implement in
bare feet, sandals or sneakers.
12. Checking area for stones, branches and other debris that might be thrown.
13. Ensuring proper lighting is available, sunlight or good artificial lighting.
3.07 - Working Speed
The working speed depends on ground conditions, type of forage crop, crop density and
humidity. Only a test run will enable you to gauge the optimal working speed for your
conditions. Under most conditions a 5 to 7 mph ground speed is best. A slower speed
may be necessary on hills or rough terrain.
O
PERATION
16
BEFCO
W
INDROWER
R
AKES
O
PERATOR
’
S
M
ANUAL