BEFCO DR0-308, Руководство оператора

Страница: 20 / 52

3.10 - Removing Windrower Rake from Tractor
CAUTION: Disengage tractor PTO. Set parking brake. Stop engine and remove
key from ignition. Disconnect windrower rake driveline from tractor PTO shaft.
Collapse driveline and store in appropriate place. Disconnect three point linkage
or pull type drawbar and carefully drive tractor away from windrower rake.
1. Park windrower rake on level and solid ground.
2. Disengage the tractor’s PTO and make sure all parts have come to a complete stop.
3. Set parking brake and place transmission in “Park”.
4. Stop engine and remove key from ignition.
5. Place support stands in position and secure them with lock pins.
6. Disconnect windrower rake driveline from tractor PTO shaft.
7. On windrower rake model DR0-308, disconnect three point linkage and carefully
drive tractor away from rake.
8. On windrower rake model DRP-308, remove the hitch pin and carefully drive tractor
away from rake.
3.11 - Transporting
CAUTION: Make sure PTO is disengaged and windrower rake tines have stopped
turning before transporting windrower rake. Do not tow tractor and windrower
rake behind other vehicles. Use a properly equipped trailer with heavy tie-downs
for towing operations.
CAUTION: A safety chain will help control drawn equipment should it accidentally
separate from the tractor drawbar. A runaway machine could cause severe injury
or death. Leave only enough slack in chain to permit turning. Do not use safety
chain for towing.
Before transporting:
1. Always select a safe ground speed that is appropriate for the terrain.
2. Beware of traffic on public roads. Install a SMV (Slow Moving Vehicle) sign when
traveling on roads or streets. Comply with all federal, state and local laws.
3. Reduce ground speed when turning and take care that the implement does not strike
obstacles such as trees, fences or buildings.
4. Always disengage PTO before raising the implement to transport position.
O
PERATION
20
BEFCO
W
INDROWER
R
AKES
O
PERATOR
’
S
M
ANUAL