Bedfont NOxBOX mobile, Техническое руководство

Страница: 9 / 84

9
DANGER: Poisonous gases can be fatal if inhaled, even in very
small quantities. Provide adequate ventilation and appropriate
personal protective equipment (PPE).
2.1.4 Poisons
This equipment contains poisonous gases. The Threshold Limit Value (TLV)
expressed as the Occupational Exposure Limit (OEL) for each gas refers, in
general, to airborne concentrations at or below which nearly all workers may
be repeatedly exposed without adverse effects. The TLV for the specialty
gas used with this equipment are stated on the cylinder body labels and the
MSDS for the gas.
Use this gas only in well-ventilated areas. Precautions against skin or eye
contact with poisonous gases include a thorough knowledge of the
dangers, training for all personnel handling such gases, the development of
procedures and equipment for handling them, and the use of special
protective clothing and equipment (such as self-contained breathing
apparatus (SCBA), portable gas monitors, protective garments, gloves, and
face shields).
2.2 Hazard Labels
On locations of the NOxBOX
i
system where hazards may occur, labels such as the one shown
in Figure 2.1.4-1: Example Hazard Label: No Pushing, warn you of any potential dangers. Read
these labels carefully, and be prepared to handle any hazardous situations that may arise. If the
labels become worn or difficult to read, contact your Bedfont representative for replacement
labels.
Figure 2.1.4-1: Example Hazard Label: No Pushing
2.3 Cleaning Precautions
WARNING: Some cleaning agents or solvents can emit toxic fumes.
Conduct all cleaning operations in a well-ventilated area. Even though
many cleaning agents are not highly toxic, take appropriate precautions.
All new equipment, as well as used equipment that may have become contaminated during
service, must be thoroughly cleaned. Any residue could contaminate the process gas and may
constitute a safety hazard.
Perform cleaning in accordance with applicable cleaning standards to ensure that the
equipment has been safely prepared for the application for which it is to be used. Carefully
inspect all cleaned parts. If any evidence of contamination is noted, clean the part again.
Bedfont offer suitable instrument cleaning wipes as system accessories.