BECKWITH ELECTRIC M-3425A, Инструкция, Страница: 370 / 482

A–1
Appendix – A
A
Configuration Record Forms
This Appendix contains forms for copying, and
recording the configuration and setting of the
M‑3425A Generator Protection Relay, and to file the
data for future reference. Examples of the suggested
use of these forms are illustrated in
Chapter 4
,
System Setup and Setpoints
and
Chapter 2
,
Operation
.
Page A‑2 contains a copy of the Relay Configuration
Table and is herein provided to define and record
the blocking inputs and output configuration for
the relay. For each function, check if
DISABLED
or check the output contacts to be operated by the
function. Also check the inputs designated to block
the function operation.
The Communication Record Form reproduces the
Communication and Setup unit menus. This form
records definition of the parameters necessary for
communication with the relay, as well as access
codes, user logo (identifying) lines, date & time
setting, and front panel display operation.
The functional Configuration Record Form
reproduces the Configure Relay menus including
the Setup Relay submenu which is accessible via
S‑3400 IPScom
®
Communication Software or the
optional M‑3931 HMI front panel module.
For each function or setpoint, refer to the
configuration you have defined using the Relay
Configuration Table, and circle whether it should
be enabled or disabled by the output contacts it will
activate, and the inputs that will block its operation.
The Setpoint & Timing Record Form allows
recording of the specific values entered for each
enabled setpoint or function. The form follows the
main menu selections of the relay.
The
AS SHIPPED
settings are included in brackets
[ ] to illustrate the factory settings of the relay.