Beckman Coulter Biomek 3000, Быстрый старт

Страница: 35 / 54

Biomek® 3000 Laboratory Automation Workstation Quick-Start Guide
3-1
3 Using the Editors While
Creating Methods
3.1 Overview
This chapter presents step-by-step information to help you learn how to use the
editors. You can follow the instructions to use the editors or read through this chapter
without performing the numbered steps. Links to specific sections offer complete
information on all the editors and allow you to use this chapter in conjunction with the
Biomek Software User’s Manual .
The editors allow your method to be customized to your special requirements. You
can go beyond the predefined project items and instrument configurations; manually
control the pod; restore instrument settings and project files; and configure external
devices using specific editors.
The editors are accessed from the
Project
or
Instrument
menus located on the
toolbar of the Biomek main editor (Figure 3-1).
This chapter includes the following information:
• General Description of Editors (Section 3.2)
• Creating New Labware in the Labware Type Editor (Section 3.3)
• Creating a New Pattern (Section 3.4)
• Checking In a Method and Project File (Section 3.5)
• Using Hardware Setup (Section 3.6)
• Creating a New Deck (Section 3.7)
• Manually Controlling the Pod (Section 3.8)