Beckman Coulter Biomek 3000, Быстрый старт

Страница: 48 / 54

3-14 Using the Editors While Creating Methods
Beckman Coulter, Inc.
3. Select
P200L
from the list. A
P200L
tool is added to the list of tools in the left
pane. Note the asterisk to the right of the tool name. This indicates the tool has
been added or modified and changes have not been saved.
Figure 3-14. Hardware Setup with new tool added
4. Click on P200L in the left pane to display the tool configuration in the right
pane.
5. If this new tool corresponded to a physical tool that would be used with the
instrument, you would enter the serial number printed on the tool label in Tool
Serial Number .
Note:
The other fields may be used to modify the performance of the tool.
However,
Tool Conversion Slope
and
Capacity
should only be changed if you
are instructed to do so by a Beckman Coulter support or service representative.
Refer to the
Biomek® 3000 Laboratory Automation Workstation User’s Manual,
Chapter 12, Configuring the Biomek® 3000 in Hardware Setup , for more
information on adding and configuring tools in
Hardware Setup
.
6. Since this tool does not correspond to a physical tool, right-click P200L in the
left pane and select Remove Device to remove the tool from Hardware
Setup .
7. Choose Accept to close Hardware Setup .
The newly added P200L
tool appears here.