Beckman Coulter Biomek 3000, Быстрый старт

Страница: 36 / 54

3-2 Using the Editors While Creating Methods
Beckman Coulter, Inc.
3.2 General Description of Editors
Several editors are used to configure Biomek Software to control your Biomek 3000
instrument. Editors are accessed from one of two menus:
• Project menu (Figure 3-1)
OR
•
Instrument
menu (Figure 3-1)
Figure 3-1. Biomek main editor
Following is a brief description of the editors available from the two menus displayed
in Figure 3-1. If you would like to learn more about a specific editor, refer to the
referenced chapter for more information.
You will work with four of the more commonly used editors and Manual Control in
this quick-start guide.
If using Accounts &
Permissions . . .
You must have Develop
Projects and Setup
Instrument permissions
to access the editors on the
Project and Instrument
menus. Refer to the
Biomek Software User’s
Manual,
Chapter 2, Using
Accounts & Permissions ,
for more information.
Project
Includes access to the
following:
Labware Type Editor
Tip Type Editor
Well Pattern Editor
Technique Browser
Liquid Type Editor
Pipetting Template Editor
Instrument
Includes access to the
following:
Hardware Setup
Deck Editor
Device Editor
Manual Control
Import/Export Utility