manualshive.com logo in svg

Beckhoff EL3773, Документация, Страница: 164 / 179

Поделиться
Скачать
Beckhoff EL3773 Скачать руководство пользователя страница 164

Appendix

EL3773

164

Version: 2.5

Changing the ESI slave identifier

The ESI/EEPROM identifier can be updated as follows under TwinCAT:

• Trouble-free EtherCAT communication must be established with the slave.

• The state of the slave is irrelevant.

• Right-clicking on the slave in the online display opens the 

EEPROM Update 

dialog, Fig. 

EEPROM

Update

Fig. 178: EEPROM Update

The new ESI description is selected in the following dialog, see Fig. 

Selecting the new ESI.

 The checkbox

Show Hidden Devices

 also displays older, normally hidden versions of a slave.

Fig. 179: Selecting the new ESI

A progress bar in the System Manager shows the progress. Data are first written, then verified.

Note

The change only takes effect after a restart.

Most EtherCAT devices read a modified ESI description immediately or after startup from
the INIT. Some communication settings such as distributed clocks are only read during
power-on. The EtherCAT slave therefore has to be switched off briefly in order for the
change to take effect.

Содержание EL3773




















































































































































































Отзывы:

Нет отзывов