Beckhoff EJ6002, Документация

Страница: 43 / 60

Commissioning
EJ6002 43 Version: 1.5
6.2.3 Input data
Index 60n0 COM Inputs Ch. 1 (n = 0), Ch. 2 (n = 1)
Index
(hex) Name Meaning Data type Flags Default
60n0:0 COM Inputs Ch. (n+1) Length of this object UINT8 RO 0x26
(38
dec
)
60n0:01 Transmit accepted The module acknowledges the receipt of data with a change of
state of this bit.
Only then are new data transferred from the controller to the
module.
BOOLEAN RO 0x00
(0
dec
)
60n0:02 Receive request By changing the state of this bit, the module notifies the con-
troller that the number of bytes indicated in index 0x60n0:09 "In-
put length" are located in the DataIn bytes.
The controller must acknowledge receipt of the data with a
change of state of the "Receive accepted" bit (index 0x70n0:02).
Only then is new data transferred from the module to the con-
troller.
BOOLEAN RO 0x00
(0
dec
)
60n0:03 Init Accepted FALSE:
The module is once again ready for serial data exchange.
TRUE:
The initialization was executed by the module.
BOOLEAN RO 0x00
(0
dec
)
60n0:04 Buffer full The receive FIFO is full.
Note All incoming data will be lost from this point on!
BOOLEAN RO 0x00
(0
dec
)
60n0:05 Parity error A parity error has occurred. BOOLEAN RO 0x00
(0
dec
)
60n0:06 Framing error A framing error has occurred. BOOLEAN RO 0x00
(0
dec
)
60n0:07 Overrun error An overrun error has occurred. BOOLEAN RO 0x00
(0
dec
)
60n0:09 Input length Number of input bytes ready for transfer from the module to the
controller. UINT8 RO 0x00
(0
dec
)
60n0:11 Data In 0 Input byte 0 UINT8 RO 0x00
(0
dec
)
… … … … … …
60n0:26 Data In 21 Input byte 21 UINT8 RO 0x00
(0
dec
)
Index 60n1 Com Ext. Inputs Ch. 1 (n = 0), Ch.2 (n = 1)
Index
(hex) Name Meaning Data type Flags Default
60n1:0 Com Ext. Inputs Ch.(n+1) Length of this object UINT8 RO 0x02
(2
dec
)
60n1:01 Rx In operation mode
“RS232, manual operation” (CoE
0x80n0:1D [
}
40] = 17
dec
) or
“RS232, manual flow control” (CoE 0x80n0:1D [
}
40] = 18
dec
) the
level of Rx input is displayed here.
BOOLEAN RO 0x00
(0
dec
)
60n1:02 CTS In operation mode
“RS232, manual operation” (CoE
0x80n0:1D [ } 40] = 17
dec
) or
“RS232, manual flow control” (CoE 0x80n0:1D [ } 40] = 18
dec
) the
level of CTS input is displayed here.
BOOLEAN RO 0x00
(0
dec
)