Beckhoff EJ6002, Документация

Страница: 13 / 60

Foreword
EJ6002 13 Version: 1.5
1.7.2 Electronic access to the BIC (eBIC)
Electronic BIC (eBIC)
The Beckhoff Identification Code (BIC) is applied to the outside of Beckhoff products in a visible place. If
possible, it should also be electronically readable.
Decisive for the electronic readout is the interface via which the product can be electronically addressed.
K-bus devices (IP20, IP67)
Currently, no electronic storage and readout is planned for these devices.
EtherCAT devices (IP20, IP67)
All Beckhoff EtherCAT devices have a so-called ESI-EEPROM, which contains the EtherCAT identity with
the revision number. Stored in it is the EtherCAT slave information, also colloquially known as ESI/XML
configuration file for the EtherCAT master. See the corresponding chapter in the EtherCAT system manual
(
Link ) for the relationships.
The eBIC is also stored in the ESI‑EEPROM. The eBIC was introduced into the Beckhoff I/O production
(terminals, box modules) from 2020; widespread implementation is expected in 2021.
The user can electronically access the eBIC (if existent) as follows:
• With all EtherCAT devices, the EtherCAT master (TwinCAT) can read the eBIC from the ESI‑EEPROM
◦ From TwinCAT 3.1 build 4024.11, the eBIC can be displayed in the online view.
◦ To do this,
check the checkbox "Show Beckhoff Identification Code (BIC)" under
EtherCAT → Advanced Settings → Diagnostics:
◦ The BTN and its contents are then displayed:
◦ Note: as can be seen in the illustration, the production data HW version, FW version and
production date, which have been programmed since 2012, can also be displayed with "Show
Production Info".
◦ From TwinCAT 3.1. build 4024.24 the functions FB_EcReadBIC and FB_EcReadBTN for reading
into the PLC and further eBIC auxiliary functions are available in the Tc2_EtherCAT Library from
v3.3.19.0.
• In the case of EtherCAT devices with CoE directory, the object 0x10E2:01 can additionally by used to
display the device's own eBIC; the PLC can also simply access the information here: